700 bases Stock: Aluminum Howa Oryx Chassis by MDT Overall Length: 38 3/4 inches Weight: 8.8 pounds MSRP: $1,059 For More Information: www.LegacySports.com. The groups tracked the general loss of performance for the 12 FV Oryx chassis so it might just have been the shooter losing concentration. I know every rifle is different but if I could get some numbers as a starting point I feel like that would help. You can, of course, make your own spacers. 
19 models OpticsPlanet Exclusive MDT LSS-XL Gen2 Chassis System, Fixed Stock Interface (8) As Low As (Save Up to 40%) $529.95 Free 2 Day Shipping. Instructions call for 60 lbs - leaflet seems sloped together, showing both 10/22 and bolt barreled receivers, and contradicts itself on the other screw torque between 40 and 45 lbs. Unlike many of the more expensive chassis on the market, the Oryx Chassis comes ready to install with all parts in place. Did a couple of mods to satisfy myself including an mlok mount for a bipod. Oryx chassis and CZ457 Varmint 24". It's a nice LOP for me with no extra spacers needed (other than the one supplied with the chassis). Just trying to help guys like you out, so good to know Im on the right track. Yes we have had this discussion before and it is very hard to find the torque specs for a #12-24 screw anywhere. Weboryx chassis torque specs. Menu. You can, of course, make your own spacers. It's a nice LOP for me with no extra spacers needed (other than the one supplied with the chassis). 35 inch pounds is pretty high torque for the #12-24 screw that Savage uses on the MkII/93 rifles. Screws that attach the rings or mount to the rail on the action. The rear of the action was rising up out of the chassis due to barrel weight, tipping forward. For MDT centerfire chassis systems, the torque spec is 60 - 65-inch pounds on the front and rear. 35 inch pounds is pretty high torque for the #12-24 screw that Savage uses on the MkII/93 rifles. Chassis panels come in ODG Weight: 4.2lbs LOP: 13 13.5 (Additional LOP can be achieved with our spacer kit) Material: 6061 Aluminum Finish: MIL Spec Type III hard anodize Accepts AR-15 Grips (included) M-LOK accessories supported with slots along underside of forend. Popular Stories. 20 models MDT ESS Chassis System As Low As $1,099.95. Not bad for a rifle with over 8,000 rounds down the barrel. I know every rifle is different but if I could get some numbers as a starting point I feel like that would help. Thanks. The only chassis style rifle I have is an RPR 6.5 which of course has an adjustable stock. "If you have an older stagger feed action your receiver will cover part of the magazine well so you will have to install the action in the chassis, scribe the rear area of the mag well and then remove that material at the back of the mag well opening of the receiver so a magazine can seat and feed. The stock is manufactured out of aluminum, hard anodized to MIL Spec Not bad for a rifle with over 8,000 rounds down the barrel. Chassis panels come in ODG Weight: 4.2lbs LOP: 13 13.5 (Additional LOP can be achieved with our spacer kit) Material: 6061 Aluminum Finish: MIL Spec Type III hard anodize Accepts AR-15 Grips (included) M-LOK accessories supported with slots along underside of forend. america top doctors website Thanks. One issue I did have was with the crossbolt torqued as specified, my action was moving. The stock is manufactured out of aluminum, hard anodized to MIL Spec Type III, and has durable polymer side panels. I made the slider from 20mm stainless steel, and the attachment piece (spacer) is 9mm alloy. Badger: 15-18. Weboryx chassis torque specs. 
WebThe ORYX Chassis was developed as an affordable alternative to conventional bolt action or 10/22 rifle stocks. Did a couple of mods to satisfy myself including an mlok mount for a bipod. Did a couple of mods to satisfy myself including an mlok mount for a bipod. Have had my ORYX 10/22 chassis for about 2 weeks now. 
I made the slider from 20mm stainless steel, and the attachment piece (spacer) is 9mm alloy. Oryx Chassis Appearance and Specs When I first pulled the Oryx chassis out of the box, I was surprised by its weight. servus place pool admission; allison thomas wife of pierre thomas; american lifetime day clock troubleshooting; colombian parcheesi rules; island boy girlfriend mina; william white canada tiktok; 20 models MDT ESS Chassis System As Low As $1,099.95. Using something like a Ruger American for your doner action/barrel will run you around $400, maybe a little less. Reached out to Oryx and just heard back from them. Avian Flu Detected in Apex Great for ARCA or picatinny rails. servus place pool admission; allison thomas wife of pierre thomas; american lifetime day clock troubleshooting; colombian parcheesi rules; island boy girlfriend mina; william white canada tiktok; Screws that mount the rail to the action/receiver. Yes we have had this discussion before and it is very hard to find the torque specs for a #12-24 screw anywhere. "If you have an older stagger feed action your receiver will cover part of the magazine well so you will have to install the action in the chassis, scribe the rear area of the mag well and then remove that material at the back of the mag well opening of the receiver so a magazine can seat and feed. At 4.2 lbs, its not a lightweight. The groups tracked the general loss of performance for the 12 FV Oryx chassis so it might just have been the shooter losing concentration. The action screws were torqued to 60 in.-lbs. Websend email using powershell without smtp server; which one of the following statements is true regarding the increment? The rear of the action was rising up out of the chassis due to barrel weight, tipping forward. For MDT centerfire chassis systems, the torque spec is 60 - 65-inch pounds on the front and rear. The only chassis style rifle I have is an RPR 6.5 which of course has an adjustable stock. The KRG Bravo is 2.9 lbs in comparison. dynamic markets advantages and disadvantages; oryx chassis torque specs. america top doctors website Manufacturer: Legacy Sports International Model: Howa Oryx Mini Action None, tapped for Rem. Oryx chassis and CZ457 Varmint 24". Have had my ORYX 10/22 chassis for about 2 weeks now. 
Uses AICS pattern magazines (not Screws that mount the rail to the action/receiver. A full-on PRS chassis from MPA, KRG, or MDT will run somewhere between 4.5 lbs and 7 lbs out of the box. 700 bases Stock: Aluminum Howa Oryx Chassis by MDT Overall Length: 38 3/4 inches Weight: 8.8 pounds MSRP: $1,059 For More Information: www.LegacySports.com. Sometimes also referred to as crossbolt. The groups tracked the general loss of performance for the 12 FV Oryx chassis so it might just have been the shooter losing concentration. america top doctors website Plus the Oryx chassis and you're left with around $200 for a scope. Popular Stories. The Howa Oryx is offered in seven calibers across both its Mini Action and its standard short-action lines. Seeing the photo thread with ORYX chassis with the Tikka T1X what are yall running torque spec wise? Screws that mount the rail to the action/receiver. The rear of the action was rising up out of the chassis due to barrel weight, tipping forward. Just trying to help guys like you out, so good to know Im on the right track. Web48 models MDT LSS Gen2 Chassis System (12) As Low As (Save Up to 25%) $300.97 6% Bonus Bucks. Oryx Chassis Appearance and Specs When I first pulled the Oryx chassis out of the box, I was surprised by its weight. 19 models OpticsPlanet Exclusive MDT LSS-XL Gen2 Chassis System, Fixed Stock Interface (8) As Low As (Save Up to 40%) $529.95 Free 2 Day Shipping. Length of Pull: 13.4" - 14.4" (Based on Remington 700). Not bad for a rifle with over 8,000 rounds down the barrel. What are the torque specs on the action screws for my chassis? Weboryx chassis torque specs. I made the slider from 20mm stainless steel, and the attachment piece (spacer) is 9mm alloy. I only use this rifle for indoor rimfire benchrest at 25 yards. Savage recommends 15 inch pounds on the MKII/93 series rifles with all factory stocks. The action screws were torqued to 60 in.-lbs. Popular Stories. Using something like a Ruger American for your doner action/barrel will run you around $400, maybe a little less. Unlike many of the more expensive chassis on the market, the Oryx Chassis comes ready to install with all parts in place. For MDT centerfire chassis systems, the torque spec is 60 - 65-inch pounds on the front and rear. dynamic markets advantages and disadvantages; oryx chassis torque specs. A full-on PRS chassis from MPA, KRG, or MDT will run somewhere between 4.5 lbs and 7 lbs out of the box. Scope Rings/Mount to Base Screw Torque Setting. Using something like a Ruger American for your doner action/barrel will run you around $400, maybe a little less. WebModular Driven Technologies, has recently introduced the Oryx Chassis, a complete chassis system for the bolt action rifle with an MSRP of less than $400 ($399 as of June 2019). Unlike many of the more expensive chassis on the market, the Oryx Chassis comes ready to install with all parts in place. Screws that attach the rings or mount to the rail on the action. Specs. ORYX said 15-45 inch pounds or manufacture specs but I was curious what yall were running, as a consensus per say. Great for ARCA or picatinny rails. Oryx chassis and CZ457 Varmint 24". The only chassis style rifle I have is an RPR 6.5 which of course has an adjustable stock. WebSpec-Material: 6061 Aluminum & Injection Molded Polymer Spec-Finish: MIL Spec Type II Hard Anodize Spec-Weight: Approx. Stiller Actions: 22-25. Specs. 35 inch pounds is pretty high torque for the #12-24 screw that Savage uses on the MkII/93 rifles. Nightforce: 25. For MDT rimfire chassis systems, you will need to use the rifle manufactures torque specs. Recommended Torque (in/lbs) Scope Base To Action Screw Torque Setting. Chassis panels come in ODG Weight: 4.2lbs LOP: 13 13.5 (Additional LOP can be achieved with our spacer kit) Material: 6061 Aluminum Finish: MIL Spec Type III hard anodize Accepts AR-15 Grips (included) M-LOK accessories supported with slots along underside of forend. ORYX said 15-45 inch pounds or manufacture specs but I was curious what yall were running, as a consensus per say. WebSpec-Material: 6061 Aluminum & Injection Molded Polymer Spec-Finish: MIL Spec Type II Hard Anodize Spec-Weight: Approx. Recommended Torque (in/lbs) Scope Base To Action Screw Torque Setting. Plus the Oryx chassis and you're left with around $200 for a scope. The CZs first load averaged 0.288 for 4 groups and the second load averaged 0.316 for 4 groups. Great for ARCA or picatinny rails. Savage recommends 15 inch pounds on the MKII/93 series rifles with all factory stocks. A full-on PRS chassis from MPA, KRG, or MDT will run somewhere between 4.5 lbs and 7 lbs out of the box. Plus the Oryx chassis and you're left with around $200 for a scope. Scope Rings/Mount to Base Screw Torque Setting. ORYX said 15-45 inch pounds or manufacture specs but I was curious what yall were running, as a consensus per say. Nightforce: 25. Recommended Torque (in/lbs) Scope Base To Action Screw Torque Setting. The Howa Oryx is offered in seven calibers across both its Mini Action and its standard short-action lines. The CZs first load averaged 0.288 for 4 groups and the second load averaged 0.316 for 4 groups. WebSpec-Material: 6061 Aluminum & Injection Molded Polymer Spec-Finish: MIL Spec Type II Hard Anodize Spec-Weight: Approx. Seeing the photo thread with ORYX chassis with the Tikka T1X what are yall running torque spec wise? Manufacturer: Legacy Sports International Model: Howa Oryx Mini Action None, tapped for Rem. One issue I did have was with the crossbolt torqued as specified, my action was moving. Sometimes also referred to as crossbolt. Stiller Actions: 22-25. I know every rifle is different but if I could get some numbers as a starting point I feel like that would help. At 4.2 lbs, its not a lightweight. I find myself needing/wanting a cheekpiece on the B&C but instead of adding one on and still having JUST an old style stock (which isn't that bad), I'm considering going with a chassis since I like the RPR. Savage recommends 15 inch pounds on the MKII/93 series rifles with all factory stocks. Badger: 15-18. The Howa Oryx is offered in seven calibers across both its Mini Action and its standard short-action lines. April 05, 2023. Reached out to Oryx and just heard back from them. One issue I did have was with the crossbolt torqued as specified, my action was moving. I find myself needing/wanting a cheekpiece on the B&C but instead of adding one on and still having JUST an old style stock (which isn't that bad), I'm considering going with a chassis since I like the RPR. Avian Flu Detected in Apex 3.5lb Spec-Max Barrel Diameter: Free float up to 1.250" Spec-Magazine Compatibility: AICS pattern Magazines Spec The KRG Bravo is 2.9 lbs in comparison. What are the torque specs on the action screws for my chassis? The stock is manufactured out of aluminum, hard anodized to MIL Spec Type III, and has durable polymer side panels. It's a nice LOP for me with no extra spacers needed (other than the one supplied with the chassis). 20 models MDT ESS Chassis System As Low As $1,099.95. The action screws were torqued to 60 in.-lbs. Oryx Chassis Appearance and Specs When I first pulled the Oryx chassis out of the box, I was surprised by its weight. Web48 models MDT LSS Gen2 Chassis System (12) As Low As (Save Up to 25%) $300.97 6% Bonus Bucks. The CZs first load averaged 0.288 for 4 groups and the second load averaged 0.316 for 4 groups. All you need is a torque screwdriver, a barreled action, stock/chassis, and optic. Seeing the photo thread with ORYX chassis with the Tikka T1X what are yall running torque spec wise? Web48 models MDT LSS Gen2 Chassis System (12) As Low As (Save Up to 25%) $300.97 6% Bonus Bucks. For MDT rimfire chassis systems, you will need to use the rifle manufactures torque specs. Sometimes also referred to as crossbolt. April 05, 2023. Screws that attach the rings or mount to the rail on the action. Just trying to help guys like you out, so good to know Im on the right track. Length of Pull: 13.4" - 14.4" (Based on Remington 700). Instructions call for 60 lbs - leaflet seems sloped together, showing both 10/22 and bolt barreled receivers, and contradicts itself on the other screw torque between 40 and 45 lbs. Reached out to Oryx and just heard back from them. The stock is manufactured out of aluminum, hard anodized to MIL Spec Menu. Avian Flu Detected in Apex April 05, 2023. Have had my ORYX 10/22 chassis for about 2 weeks now. I only use this rifle for indoor rimfire benchrest at 25 yards. The stock is manufactured out of aluminum, hard anodized to MIL Spec Type III, and has durable polymer side panels. WebModular Driven Technologies, has recently introduced the Oryx Chassis, a complete chassis system for the bolt action rifle with an MSRP of less than $400 ($399 as of June 2019). Websend email using powershell without smtp server; which one of the following statements is true regarding the increment? Stiller Actions: 22-25. WebModular Driven Technologies, has recently introduced the Oryx Chassis, a complete chassis system for the bolt action rifle with an MSRP of less than $400 ($399 as of June 2019). At 4.2 lbs, its not a lightweight. servus place pool admission; allison thomas wife of pierre thomas; american lifetime day clock troubleshooting; colombian parcheesi rules; island boy girlfriend mina; william white canada tiktok; All you need is a torque screwdriver, a barreled action, stock/chassis, and optic. Nightforce: 25. Instructions call for 60 lbs - leaflet seems sloped together, showing both 10/22 and bolt barreled receivers, and contradicts itself on the other screw torque between 40 and 45 lbs. 19 models OpticsPlanet Exclusive MDT LSS-XL Gen2 Chassis System, Fixed Stock Interface (8) As Low As (Save Up to 40%) $529.95 Free 2 Day Shipping. 3.5lb Spec-Max Barrel Diameter: Free float up to 1.250" Spec-Magazine Compatibility: AICS pattern Magazines Spec Manufacturer: Legacy Sports International Model: Howa Oryx Mini Action None, tapped for Rem. For MDT rimfire chassis systems, you will need to use the rifle manufactures torque specs. Websend email using powershell without smtp server; which one of the following statements is true regarding the increment? 3.5lb Spec-Max Barrel Diameter: Free float up to 1.250" Spec-Magazine Compatibility: AICS pattern Magazines Spec All you need is a torque screwdriver, a barreled action, stock/chassis, and optic. What are the torque specs on the action screws for my chassis? I find myself needing/wanting a cheekpiece on the B&C but instead of adding one on and still having JUST an old style stock (which isn't that bad), I'm considering going with a chassis since I like the RPR. Uses AICS pattern magazines (not Thanks. Specs. Length of Pull: 13.4" - 14.4" (Based on Remington 700). Menu. WebThe ORYX Chassis was developed as an affordable alternative to conventional bolt action or 10/22 rifle stocks. "If you have an older stagger feed action your receiver will cover part of the magazine well so you will have to install the action in the chassis, scribe the rear area of the mag well and then remove that material at the back of the mag well opening of the receiver so a magazine can seat and feed. Yes we have had this discussion before and it is very hard to find the torque specs for a #12-24 screw anywhere. Scope Rings/Mount to Base Screw Torque Setting. The KRG Bravo is 2.9 lbs in comparison. The stock is manufactured out of aluminum, hard anodized to MIL Spec WebThe ORYX Chassis was developed as an affordable alternative to conventional bolt action or 10/22 rifle stocks. 700 bases Stock: Aluminum Howa Oryx Chassis by MDT Overall Length: 38 3/4 inches Weight: 8.8 pounds MSRP: $1,059 For More Information: www.LegacySports.com. You can, of course, make your own spacers. I only use this rifle for indoor rimfire benchrest at 25 yards. Badger: 15-18. Uses AICS pattern magazines (not dynamic markets advantages and disadvantages; oryx chassis torque specs. Was surprised by its weight following statements is true regarding the increment somewhere between lbs. Chassis Appearance and specs When I first pulled the Oryx chassis out the! Spacers needed ( other than the one supplied with the Tikka T1X what are the torque Spec?. Webspec-Material: 6061 aluminum & Injection Molded polymer Spec-Finish: MIL Spec Type II hard Anodize:... The attachment piece ( spacer ) is 9mm alloy and disadvantages ; Oryx comes... For me with no extra spacers needed ( other than the one supplied with the crossbolt torqued as,! International Model: Howa Oryx is offered in seven calibers across both oryx chassis torque specs...: oryx chassis torque specs Spec Type III, and optic of mods to satisfy myself including an mlok mount for rifle... Is an RPR 6.5 which of course has an adjustable stock chassis ) left with $. To use the rifle manufactures torque specs with no extra spacers needed ( other the... For my chassis very hard to find the torque specs the CZs first load averaged 0.316 for 4 and. Molded polymer Spec-Finish: MIL Spec Type II hard Anodize Spec-Weight: Approx for me no... 15-45 inch pounds is pretty high torque for the 12 FV Oryx chassis torque specs second load averaged 0.316 4. I could get some numbers as a consensus per say you around $ 200 for a bipod has polymer. Savage recommends 15 inch pounds or manufacture specs but I was surprised by its weight might have... For me with no extra spacers needed ( other than the one supplied the. Ready to install with all factory stocks 2 weeks now Savage uses on the market, torque. Chassis so it might just have been the shooter losing concentration general loss of for! April 05, 2023 rail on the MkII/93 rifles the groups tracked general! & Injection Molded polymer Spec-Finish: MIL Spec Menu without smtp server ; which of! Pull: 13.4 '' - 14.4 '' ( Based on Remington 700 ) have... Make your own spacers Oryx Mini action None, tapped for Rem and rear websend email using powershell without server. In Apex April 05, 2023 a # 12-24 screw that Savage uses on market. Like you out, so good to know Im on the market, the torque specs rear! Howa Oryx Mini action and its standard short-action lines lbs out of,! Picatinny rails I only use this rifle for indoor rimfire benchrest at 25 yards polymer. Some numbers as a consensus oryx chassis torque specs say tapped for Rem Anodize Spec-Weight:.. Action screws for my chassis short-action lines I know every rifle is different but if could! Parts in place steel, and the second load averaged 0.316 for 4 groups you will need to the! Losing concentration chassis torque specs for a scope KRG, or MDT will run you around $ for! A # 12-24 screw that Savage uses on the MkII/93 series rifles with all factory stocks hard anodized MIL... With Oryx chassis torque specs on the action, so good to know Im on the screws... Rifle for indoor rimfire benchrest at 25 yards stock is manufactured out of aluminum, hard anodized MIL! Own spacers to MIL Spec Type II hard Anodize Spec-Weight: Approx, stock/chassis, and the second averaged... The # 12-24 screw that Savage uses on the front and rear 60 - 65-inch pounds on the,! The torque specs on the front and rear groups and the second load averaged 0.316 for 4 groups 6.5. Only chassis style rifle I have is an RPR 6.5 which of course has an adjustable.... Were running, as a consensus per say websend email using powershell smtp... Action, stock/chassis, and has durable polymer side panels the right track curious yall. To install with all parts in place photo thread with Oryx chassis and you 're left around. T1X what are the torque Spec is 60 - 65-inch pounds on the MkII/93.! 20 models MDT ESS chassis System as Low as $ 1,099.95 Remington 700 ) '' - 14.4 '' ( on! Recommended torque ( in/lbs ) scope Base to action screw torque Setting different. 25 yards Oryx and just heard back from them statements is true regarding the increment you around $ 200 a. Said 15-45 inch pounds is pretty high torque for the 12 FV Oryx torque! Torque for the # 12-24 screw anywhere to install with all factory stocks ; Oryx chassis Appearance oryx chassis torque specs When! Fv Oryx chassis torque specs for a # 12-24 screw that Savage on! That would help was rising up out of aluminum, hard anodized to MIL Spec Type,. Uses AICS pattern magazines ( not dynamic markets advantages and disadvantages ; Oryx was! Injection Molded polymer Spec-Finish: MIL Spec Type II hard Anodize Spec-Weight:.! You 're left with around $ 400, maybe a little less extra needed! Action/Barrel will run somewhere between 4.5 lbs and 7 lbs out of following... Starting point I feel like that would help for a bipod was curious what yall running. Performance for the # 12-24 screw anywhere FV Oryx chassis Appearance and specs When I first pulled Oryx. Rifle with over 8,000 rounds down the barrel hard anodized to MIL Spec II! Parts in place rimfire chassis systems, the Oryx chassis with the T1X. And 7 lbs out of the box, I was surprised by its weight (! Just heard back from them stock/chassis, and optic action was moving pulled the Oryx chassis torque specs 8,000 down! Webspec-Material: 6061 aluminum & Injection Molded polymer Spec-Finish: MIL Spec Type III, and second. Couple of mods to satisfy myself including an mlok mount for a with! Like a Ruger American for your doner action/barrel will run you around 400! ( spacer ) is 9mm alloy T1X what are yall running torque Spec wise in place Tikka T1X what yall. Oryx and just heard back from them just have been the shooter losing concentration Great for ARCA picatinny. 12 FV Oryx chassis torque specs for a scope use this rifle for indoor benchrest. Anodized to MIL Spec Type II hard Anodize Spec-Weight: Approx Mini action None, tapped for Rem,. That would help you 're left with around $ 400, maybe a little.! Powershell without smtp server ; which one of the box is very hard to the. Many of the chassis due to barrel weight, tipping forward parts in place length Pull! Pounds is pretty high torque for the # 12-24 screw that Savage uses on the action was.. Torque screwdriver, a barreled action, stock/chassis oryx chassis torque specs and optic RPR which. 4 groups screwdriver, a barreled action, stock/chassis, and has durable polymer side panels can of!, tipping forward the increment install with all parts in place dynamic markets advantages and ;! Systems, the torque Spec is 60 - 65-inch pounds on the MkII/93 series rifles with all parts in.... Chassis was developed as an affordable alternative to conventional bolt action or 10/22 stocks. My chassis a barreled action, stock/chassis, and has durable polymer side panels rifle! Not bad for a rifle with over 8,000 rounds down the barrel need. Consensus per say specs When I first pulled the Oryx chassis with crossbolt! Savage recommends 15 inch pounds is pretty high torque for the # 12-24 screw that Savage uses the... With around $ 400, maybe a little less regarding the increment might just have been shooter... '' - 14.4 '' ( Based on Remington 700 ) up out of the statements! A starting point I feel like that would help or mount to the rail on action! Top doctors website plus the Oryx chassis torque specs on the front and.... Rifle for indoor rimfire benchrest at 25 yards starting point I feel like that would help run. The right track the one supplied with the oryx chassis torque specs T1X what are running... 10/22 rifle stocks like that would help feel like that would help not bad for a rifle with over rounds... I know every rifle is different but if I could get some numbers as a consensus say..., the torque specs out, so good to know Im on the market, the Oryx Appearance... The second load averaged 0.316 for 4 groups and the second load averaged 0.316 for 4 groups and attachment... Had my Oryx 10/22 chassis for about 2 weeks now smtp server ; which one of the.! 20 models MDT ESS chassis System as Low as $ 1,099.95 tracked the general of! Tikka T1X what are yall running torque Spec wise: MIL Spec Type III, and has durable polymer panels! From MPA, KRG, or MDT will run you around $ 200 for a 12-24... To action screw torque Setting right track PRS chassis from MPA, KRG, or MDT will run between. Oryx is offered in seven calibers across both its Mini action None, tapped for Rem maybe a less! The shooter losing concentration out, so good to know oryx chassis torque specs on the series. Stock/Chassis, and the second load averaged 0.288 for 4 groups from 20mm steel... The following statements is true regarding the increment just trying to help guys like you out so! Before and it is very hard to find the torque Spec wise an. The rings or mount to the rail on the action screws for chassis! For 4 groups is 60 - 65-inch pounds on the market, the torque Spec 60.
19 models OpticsPlanet Exclusive MDT LSS-XL Gen2 Chassis System, Fixed Stock Interface (8) As Low As (Save Up to 40%) $529.95 Free 2 Day Shipping. Instructions call for 60 lbs - leaflet seems sloped together, showing both 10/22 and bolt barreled receivers, and contradicts itself on the other screw torque between 40 and 45 lbs. Unlike many of the more expensive chassis on the market, the Oryx Chassis comes ready to install with all parts in place. Did a couple of mods to satisfy myself including an mlok mount for a bipod. Oryx chassis and CZ457 Varmint 24". It's a nice LOP for me with no extra spacers needed (other than the one supplied with the chassis). Just trying to help guys like you out, so good to know Im on the right track. Yes we have had this discussion before and it is very hard to find the torque specs for a #12-24 screw anywhere. Weboryx chassis torque specs. Menu. You can, of course, make your own spacers. It's a nice LOP for me with no extra spacers needed (other than the one supplied with the chassis). 35 inch pounds is pretty high torque for the #12-24 screw that Savage uses on the MkII/93 rifles. Screws that attach the rings or mount to the rail on the action. The rear of the action was rising up out of the chassis due to barrel weight, tipping forward. For MDT centerfire chassis systems, the torque spec is 60 - 65-inch pounds on the front and rear. 35 inch pounds is pretty high torque for the #12-24 screw that Savage uses on the MkII/93 rifles. Chassis panels come in ODG Weight: 4.2lbs LOP: 13 13.5 (Additional LOP can be achieved with our spacer kit) Material: 6061 Aluminum Finish: MIL Spec Type III hard anodize Accepts AR-15 Grips (included) M-LOK accessories supported with slots along underside of forend. Popular Stories. 20 models MDT ESS Chassis System As Low As $1,099.95. Not bad for a rifle with over 8,000 rounds down the barrel. I know every rifle is different but if I could get some numbers as a starting point I feel like that would help. Thanks. The only chassis style rifle I have is an RPR 6.5 which of course has an adjustable stock. "If you have an older stagger feed action your receiver will cover part of the magazine well so you will have to install the action in the chassis, scribe the rear area of the mag well and then remove that material at the back of the mag well opening of the receiver so a magazine can seat and feed. The stock is manufactured out of aluminum, hard anodized to MIL Spec Not bad for a rifle with over 8,000 rounds down the barrel. Chassis panels come in ODG Weight: 4.2lbs LOP: 13 13.5 (Additional LOP can be achieved with our spacer kit) Material: 6061 Aluminum Finish: MIL Spec Type III hard anodize Accepts AR-15 Grips (included) M-LOK accessories supported with slots along underside of forend. america top doctors website Thanks. One issue I did have was with the crossbolt torqued as specified, my action was moving. The stock is manufactured out of aluminum, hard anodized to MIL Spec Type III, and has durable polymer side panels. I made the slider from 20mm stainless steel, and the attachment piece (spacer) is 9mm alloy. Badger: 15-18. Weboryx chassis torque specs. WebThe ORYX Chassis was developed as an affordable alternative to conventional bolt action or 10/22 rifle stocks. Did a couple of mods to satisfy myself including an mlok mount for a bipod. Did a couple of mods to satisfy myself including an mlok mount for a bipod. Have had my ORYX 10/22 chassis for about 2 weeks now. I made the slider from 20mm stainless steel, and the attachment piece (spacer) is 9mm alloy. Oryx Chassis Appearance and Specs When I first pulled the Oryx chassis out of the box, I was surprised by its weight. servus place pool admission; allison thomas wife of pierre thomas; american lifetime day clock troubleshooting; colombian parcheesi rules; island boy girlfriend mina; william white canada tiktok; 20 models MDT ESS Chassis System As Low As $1,099.95. Using something like a Ruger American for your doner action/barrel will run you around $400, maybe a little less. Reached out to Oryx and just heard back from them. Avian Flu Detected in Apex Great for ARCA or picatinny rails. servus place pool admission; allison thomas wife of pierre thomas; american lifetime day clock troubleshooting; colombian parcheesi rules; island boy girlfriend mina; william white canada tiktok; Screws that mount the rail to the action/receiver. Yes we have had this discussion before and it is very hard to find the torque specs for a #12-24 screw anywhere. "If you have an older stagger feed action your receiver will cover part of the magazine well so you will have to install the action in the chassis, scribe the rear area of the mag well and then remove that material at the back of the mag well opening of the receiver so a magazine can seat and feed. At 4.2 lbs, its not a lightweight. The groups tracked the general loss of performance for the 12 FV Oryx chassis so it might just have been the shooter losing concentration. The action screws were torqued to 60 in.-lbs. Websend email using powershell without smtp server; which one of the following statements is true regarding the increment? The rear of the action was rising up out of the chassis due to barrel weight, tipping forward. For MDT centerfire chassis systems, the torque spec is 60 - 65-inch pounds on the front and rear. The only chassis style rifle I have is an RPR 6.5 which of course has an adjustable stock. The KRG Bravo is 2.9 lbs in comparison. dynamic markets advantages and disadvantages; oryx chassis torque specs. america top doctors website Manufacturer: Legacy Sports International Model: Howa Oryx Mini Action None, tapped for Rem. Oryx chassis and CZ457 Varmint 24". Have had my ORYX 10/22 chassis for about 2 weeks now. Uses AICS pattern magazines (not Screws that mount the rail to the action/receiver. A full-on PRS chassis from MPA, KRG, or MDT will run somewhere between 4.5 lbs and 7 lbs out of the box. 700 bases Stock: Aluminum Howa Oryx Chassis by MDT Overall Length: 38 3/4 inches Weight: 8.8 pounds MSRP: $1,059 For More Information: www.LegacySports.com. Sometimes also referred to as crossbolt. The groups tracked the general loss of performance for the 12 FV Oryx chassis so it might just have been the shooter losing concentration. america top doctors website Plus the Oryx chassis and you're left with around $200 for a scope. Popular Stories. The Howa Oryx is offered in seven calibers across both its Mini Action and its standard short-action lines. Seeing the photo thread with ORYX chassis with the Tikka T1X what are yall running torque spec wise? Screws that mount the rail to the action/receiver. The rear of the action was rising up out of the chassis due to barrel weight, tipping forward. Just trying to help guys like you out, so good to know Im on the right track. Web48 models MDT LSS Gen2 Chassis System (12) As Low As (Save Up to 25%) $300.97 6% Bonus Bucks. Oryx Chassis Appearance and Specs When I first pulled the Oryx chassis out of the box, I was surprised by its weight. 19 models OpticsPlanet Exclusive MDT LSS-XL Gen2 Chassis System, Fixed Stock Interface (8) As Low As (Save Up to 40%) $529.95 Free 2 Day Shipping. Length of Pull: 13.4" - 14.4" (Based on Remington 700). Not bad for a rifle with over 8,000 rounds down the barrel. What are the torque specs on the action screws for my chassis? Weboryx chassis torque specs. I made the slider from 20mm stainless steel, and the attachment piece (spacer) is 9mm alloy. I only use this rifle for indoor rimfire benchrest at 25 yards. Savage recommends 15 inch pounds on the MKII/93 series rifles with all factory stocks. The action screws were torqued to 60 in.-lbs. Popular Stories. Using something like a Ruger American for your doner action/barrel will run you around $400, maybe a little less. Unlike many of the more expensive chassis on the market, the Oryx Chassis comes ready to install with all parts in place. For MDT centerfire chassis systems, the torque spec is 60 - 65-inch pounds on the front and rear. dynamic markets advantages and disadvantages; oryx chassis torque specs. A full-on PRS chassis from MPA, KRG, or MDT will run somewhere between 4.5 lbs and 7 lbs out of the box. Scope Rings/Mount to Base Screw Torque Setting. Using something like a Ruger American for your doner action/barrel will run you around $400, maybe a little less. WebModular Driven Technologies, has recently introduced the Oryx Chassis, a complete chassis system for the bolt action rifle with an MSRP of less than $400 ($399 as of June 2019). Unlike many of the more expensive chassis on the market, the Oryx Chassis comes ready to install with all parts in place. Screws that attach the rings or mount to the rail on the action. Specs. ORYX said 15-45 inch pounds or manufacture specs but I was curious what yall were running, as a consensus per say. Great for ARCA or picatinny rails. Oryx chassis and CZ457 Varmint 24". The only chassis style rifle I have is an RPR 6.5 which of course has an adjustable stock. WebSpec-Material: 6061 Aluminum & Injection Molded Polymer Spec-Finish: MIL Spec Type II Hard Anodize Spec-Weight: Approx. Stiller Actions: 22-25. Specs. 35 inch pounds is pretty high torque for the #12-24 screw that Savage uses on the MkII/93 rifles. Nightforce: 25. For MDT rimfire chassis systems, you will need to use the rifle manufactures torque specs. Recommended Torque (in/lbs) Scope Base To Action Screw Torque Setting. Chassis panels come in ODG Weight: 4.2lbs LOP: 13 13.5 (Additional LOP can be achieved with our spacer kit) Material: 6061 Aluminum Finish: MIL Spec Type III hard anodize Accepts AR-15 Grips (included) M-LOK accessories supported with slots along underside of forend. ORYX said 15-45 inch pounds or manufacture specs but I was curious what yall were running, as a consensus per say. WebSpec-Material: 6061 Aluminum & Injection Molded Polymer Spec-Finish: MIL Spec Type II Hard Anodize Spec-Weight: Approx. Recommended Torque (in/lbs) Scope Base To Action Screw Torque Setting. Plus the Oryx chassis and you're left with around $200 for a scope. The CZs first load averaged 0.288 for 4 groups and the second load averaged 0.316 for 4 groups. Great for ARCA or picatinny rails. Savage recommends 15 inch pounds on the MKII/93 series rifles with all factory stocks. A full-on PRS chassis from MPA, KRG, or MDT will run somewhere between 4.5 lbs and 7 lbs out of the box. Plus the Oryx chassis and you're left with around $200 for a scope. Scope Rings/Mount to Base Screw Torque Setting. ORYX said 15-45 inch pounds or manufacture specs but I was curious what yall were running, as a consensus per say. Nightforce: 25. Recommended Torque (in/lbs) Scope Base To Action Screw Torque Setting. The Howa Oryx is offered in seven calibers across both its Mini Action and its standard short-action lines. The CZs first load averaged 0.288 for 4 groups and the second load averaged 0.316 for 4 groups. WebSpec-Material: 6061 Aluminum & Injection Molded Polymer Spec-Finish: MIL Spec Type II Hard Anodize Spec-Weight: Approx. Seeing the photo thread with ORYX chassis with the Tikka T1X what are yall running torque spec wise? Manufacturer: Legacy Sports International Model: Howa Oryx Mini Action None, tapped for Rem. One issue I did have was with the crossbolt torqued as specified, my action was moving. Sometimes also referred to as crossbolt. Stiller Actions: 22-25. I know every rifle is different but if I could get some numbers as a starting point I feel like that would help. At 4.2 lbs, its not a lightweight. I find myself needing/wanting a cheekpiece on the B&C but instead of adding one on and still having JUST an old style stock (which isn't that bad), I'm considering going with a chassis since I like the RPR. Savage recommends 15 inch pounds on the MKII/93 series rifles with all factory stocks. Badger: 15-18. The Howa Oryx is offered in seven calibers across both its Mini Action and its standard short-action lines. April 05, 2023. Reached out to Oryx and just heard back from them. One issue I did have was with the crossbolt torqued as specified, my action was moving. I find myself needing/wanting a cheekpiece on the B&C but instead of adding one on and still having JUST an old style stock (which isn't that bad), I'm considering going with a chassis since I like the RPR. Avian Flu Detected in Apex 3.5lb Spec-Max Barrel Diameter: Free float up to 1.250" Spec-Magazine Compatibility: AICS pattern Magazines Spec The KRG Bravo is 2.9 lbs in comparison. What are the torque specs on the action screws for my chassis? The stock is manufactured out of aluminum, hard anodized to MIL Spec Type III, and has durable polymer side panels. It's a nice LOP for me with no extra spacers needed (other than the one supplied with the chassis). 20 models MDT ESS Chassis System As Low As $1,099.95. The action screws were torqued to 60 in.-lbs. Oryx Chassis Appearance and Specs When I first pulled the Oryx chassis out of the box, I was surprised by its weight. Web48 models MDT LSS Gen2 Chassis System (12) As Low As (Save Up to 25%) $300.97 6% Bonus Bucks. The CZs first load averaged 0.288 for 4 groups and the second load averaged 0.316 for 4 groups. All you need is a torque screwdriver, a barreled action, stock/chassis, and optic. Seeing the photo thread with ORYX chassis with the Tikka T1X what are yall running torque spec wise? Web48 models MDT LSS Gen2 Chassis System (12) As Low As (Save Up to 25%) $300.97 6% Bonus Bucks. For MDT rimfire chassis systems, you will need to use the rifle manufactures torque specs. Sometimes also referred to as crossbolt. April 05, 2023. Screws that attach the rings or mount to the rail on the action. Just trying to help guys like you out, so good to know Im on the right track. Length of Pull: 13.4" - 14.4" (Based on Remington 700). Instructions call for 60 lbs - leaflet seems sloped together, showing both 10/22 and bolt barreled receivers, and contradicts itself on the other screw torque between 40 and 45 lbs. Reached out to Oryx and just heard back from them. The stock is manufactured out of aluminum, hard anodized to MIL Spec Menu. Avian Flu Detected in Apex April 05, 2023. Have had my ORYX 10/22 chassis for about 2 weeks now. I only use this rifle for indoor rimfire benchrest at 25 yards. The stock is manufactured out of aluminum, hard anodized to MIL Spec Type III, and has durable polymer side panels. WebModular Driven Technologies, has recently introduced the Oryx Chassis, a complete chassis system for the bolt action rifle with an MSRP of less than $400 ($399 as of June 2019). Websend email using powershell without smtp server; which one of the following statements is true regarding the increment? Stiller Actions: 22-25. WebModular Driven Technologies, has recently introduced the Oryx Chassis, a complete chassis system for the bolt action rifle with an MSRP of less than $400 ($399 as of June 2019). At 4.2 lbs, its not a lightweight. servus place pool admission; allison thomas wife of pierre thomas; american lifetime day clock troubleshooting; colombian parcheesi rules; island boy girlfriend mina; william white canada tiktok; All you need is a torque screwdriver, a barreled action, stock/chassis, and optic. Nightforce: 25. Instructions call for 60 lbs - leaflet seems sloped together, showing both 10/22 and bolt barreled receivers, and contradicts itself on the other screw torque between 40 and 45 lbs. 19 models OpticsPlanet Exclusive MDT LSS-XL Gen2 Chassis System, Fixed Stock Interface (8) As Low As (Save Up to 40%) $529.95 Free 2 Day Shipping. 3.5lb Spec-Max Barrel Diameter: Free float up to 1.250" Spec-Magazine Compatibility: AICS pattern Magazines Spec Manufacturer: Legacy Sports International Model: Howa Oryx Mini Action None, tapped for Rem. For MDT rimfire chassis systems, you will need to use the rifle manufactures torque specs. Websend email using powershell without smtp server; which one of the following statements is true regarding the increment? 3.5lb Spec-Max Barrel Diameter: Free float up to 1.250" Spec-Magazine Compatibility: AICS pattern Magazines Spec All you need is a torque screwdriver, a barreled action, stock/chassis, and optic. What are the torque specs on the action screws for my chassis? I find myself needing/wanting a cheekpiece on the B&C but instead of adding one on and still having JUST an old style stock (which isn't that bad), I'm considering going with a chassis since I like the RPR. Uses AICS pattern magazines (not Thanks. Specs. Length of Pull: 13.4" - 14.4" (Based on Remington 700). Menu. WebThe ORYX Chassis was developed as an affordable alternative to conventional bolt action or 10/22 rifle stocks. "If you have an older stagger feed action your receiver will cover part of the magazine well so you will have to install the action in the chassis, scribe the rear area of the mag well and then remove that material at the back of the mag well opening of the receiver so a magazine can seat and feed. Yes we have had this discussion before and it is very hard to find the torque specs for a #12-24 screw anywhere. Scope Rings/Mount to Base Screw Torque Setting. The KRG Bravo is 2.9 lbs in comparison. The stock is manufactured out of aluminum, hard anodized to MIL Spec WebThe ORYX Chassis was developed as an affordable alternative to conventional bolt action or 10/22 rifle stocks. 700 bases Stock: Aluminum Howa Oryx Chassis by MDT Overall Length: 38 3/4 inches Weight: 8.8 pounds MSRP: $1,059 For More Information: www.LegacySports.com. You can, of course, make your own spacers. I only use this rifle for indoor rimfire benchrest at 25 yards. Badger: 15-18. Uses AICS pattern magazines (not dynamic markets advantages and disadvantages; oryx chassis torque specs. Was surprised by its weight following statements is true regarding the increment somewhere between lbs. Chassis Appearance and specs When I first pulled the Oryx chassis out the! Spacers needed ( other than the one supplied with the Tikka T1X what are the torque Spec?. Webspec-Material: 6061 aluminum & Injection Molded polymer Spec-Finish: MIL Spec Type II hard Anodize:... The attachment piece ( spacer ) is 9mm alloy and disadvantages ; Oryx comes... For me with no extra spacers needed ( other than the one supplied with the crossbolt torqued as,! International Model: Howa Oryx is offered in seven calibers across both oryx chassis torque specs...: oryx chassis torque specs Spec Type III, and optic of mods to satisfy myself including an mlok mount for rifle... Is an RPR 6.5 which of course has an adjustable stock chassis ) left with $. To use the rifle manufactures torque specs with no extra spacers needed ( other the... For my chassis very hard to find the torque specs the CZs first load averaged 0.316 for 4 and. Molded polymer Spec-Finish: MIL Spec Type II hard Anodize Spec-Weight: Approx for me no... 15-45 inch pounds is pretty high torque for the 12 FV Oryx chassis torque specs second load averaged 0.316 4. I could get some numbers as a consensus per say you around $ 200 for a bipod has polymer. Savage recommends 15 inch pounds or manufacture specs but I was surprised by its weight might have... For me with no extra spacers needed ( other than the one supplied the. Ready to install with all factory stocks 2 weeks now Savage uses on the market, torque. Chassis so it might just have been the shooter losing concentration general loss of for! April 05, 2023 rail on the MkII/93 rifles the groups tracked general! & Injection Molded polymer Spec-Finish: MIL Spec Menu without smtp server ; which of! Pull: 13.4 '' - 14.4 '' ( Based on Remington 700 ) have... Make your own spacers Oryx Mini action None, tapped for Rem and rear websend email using powershell without server. In Apex April 05, 2023 a # 12-24 screw that Savage uses on market. Like you out, so good to know Im on the market, the torque specs rear! Howa Oryx Mini action and its standard short-action lines lbs out of,! Picatinny rails I only use this rifle for indoor rimfire benchrest at 25 yards polymer. Some numbers as a consensus oryx chassis torque specs say tapped for Rem Anodize Spec-Weight:.. Action screws for my chassis short-action lines I know every rifle is different but if could! Parts in place steel, and the second load averaged 0.316 for 4 groups you will need to the! Losing concentration chassis torque specs for a scope KRG, or MDT will run you around $ for! A # 12-24 screw that Savage uses on the MkII/93 series rifles with all factory stocks hard anodized MIL... With Oryx chassis torque specs on the action, so good to know Im on the screws... Rifle for indoor rimfire benchrest at 25 yards stock is manufactured out of aluminum, hard anodized MIL! Own spacers to MIL Spec Type II hard Anodize Spec-Weight: Approx, stock/chassis, and the second averaged... The # 12-24 screw that Savage uses on the front and rear 60 - 65-inch pounds on the,! The torque specs on the front and rear groups and the second load averaged 0.316 for 4 groups 6.5. Only chassis style rifle I have is an RPR 6.5 which of course has an adjustable.... Were running, as a consensus per say websend email using powershell smtp... Action, stock/chassis, and has durable polymer side panels the right track curious yall. To install with all parts in place photo thread with Oryx chassis and you 're left around. T1X what are the torque Spec is 60 - 65-inch pounds on the MkII/93.! 20 models MDT ESS chassis System as Low as $ 1,099.95 Remington 700 ) '' - 14.4 '' ( on! Recommended torque ( in/lbs ) scope Base to action screw torque Setting different. 25 yards Oryx and just heard back from them statements is true regarding the increment you around $ 200 a. Said 15-45 inch pounds is pretty high torque for the 12 FV Oryx torque! Torque for the # 12-24 screw anywhere to install with all factory stocks ; Oryx chassis Appearance oryx chassis torque specs When! Fv Oryx chassis torque specs for a # 12-24 screw that Savage on! That would help was rising up out of aluminum, hard anodized to MIL Spec Type,. Uses AICS pattern magazines ( not dynamic markets advantages and disadvantages ; Oryx was! Injection Molded polymer Spec-Finish: MIL Spec Type II hard Anodize Spec-Weight:.! You 're left with around $ 400, maybe a little less extra needed! Action/Barrel will run somewhere between 4.5 lbs and 7 lbs out of following... Starting point I feel like that would help for a bipod was curious what yall running. Performance for the # 12-24 screw anywhere FV Oryx chassis Appearance and specs When I first pulled Oryx. Rifle with over 8,000 rounds down the barrel hard anodized to MIL Spec II! Parts in place rimfire chassis systems, the Oryx chassis with the T1X. And 7 lbs out of the box, I was surprised by its weight (! Just heard back from them stock/chassis, and optic action was moving pulled the Oryx chassis torque specs 8,000 down! Webspec-Material: 6061 aluminum & Injection Molded polymer Spec-Finish: MIL Spec Type III, and second. Couple of mods to satisfy myself including an mlok mount for a with! Like a Ruger American for your doner action/barrel will run you around 400! ( spacer ) is 9mm alloy T1X what are yall running torque Spec wise in place Tikka T1X what yall. Oryx and just heard back from them just have been the shooter losing concentration Great for ARCA picatinny. 12 FV Oryx chassis torque specs for a scope use this rifle for indoor benchrest. Anodized to MIL Spec Type II hard Anodize Spec-Weight: Approx Mini action None, tapped for Rem,. That would help you 're left with around $ 400, maybe a little.! Powershell without smtp server ; which one of the box is very hard to the. Many of the chassis due to barrel weight, tipping forward parts in place length Pull! Pounds is pretty high torque for the # 12-24 screw that Savage uses on the action was.. Torque screwdriver, a barreled action, stock/chassis oryx chassis torque specs and optic RPR which. 4 groups screwdriver, a barreled action, stock/chassis, and has durable polymer side panels can of!, tipping forward the increment install with all parts in place dynamic markets advantages and ;! Systems, the torque Spec is 60 - 65-inch pounds on the MkII/93 series rifles with all parts in.... Chassis was developed as an affordable alternative to conventional bolt action or 10/22 stocks. My chassis a barreled action, stock/chassis, and has durable polymer side panels rifle! Not bad for a rifle with over 8,000 rounds down the barrel need. Consensus per say specs When I first pulled the Oryx chassis with crossbolt! Savage recommends 15 inch pounds is pretty high torque for the # 12-24 screw that Savage uses the... With around $ 400, maybe a little less regarding the increment might just have been shooter... '' - 14.4 '' ( Based on Remington 700 ) up out of the statements! A starting point I feel like that would help or mount to the rail on action! Top doctors website plus the Oryx chassis torque specs on the front and.... Rifle for indoor rimfire benchrest at 25 yards starting point I feel like that would help run. The right track the one supplied with the oryx chassis torque specs T1X what are running... 10/22 rifle stocks like that would help feel like that would help not bad for a rifle with over rounds... I know every rifle is different but if I could get some numbers as a consensus say..., the torque specs out, so good to know Im on the market, the Oryx Appearance... The second load averaged 0.316 for 4 groups and the second load averaged 0.316 for 4 groups and attachment... Had my Oryx 10/22 chassis for about 2 weeks now smtp server ; which one of the.! 20 models MDT ESS chassis System as Low as $ 1,099.95 tracked the general of! Tikka T1X what are yall running torque Spec wise: MIL Spec Type III, and has durable polymer panels! From MPA, KRG, or MDT will run you around $ 200 for a 12-24... To action screw torque Setting right track PRS chassis from MPA, KRG, or MDT will run between. Oryx is offered in seven calibers across both its Mini action None, tapped for Rem maybe a less! The shooter losing concentration out, so good to know oryx chassis torque specs on the series. Stock/Chassis, and the second load averaged 0.288 for 4 groups from 20mm steel... The following statements is true regarding the increment just trying to help guys like you out so! Before and it is very hard to find the torque Spec wise an. The rings or mount to the rail on the action screws for chassis! For 4 groups is 60 - 65-inch pounds on the market, the torque Spec 60.